Analogue signal components such as a VCR.
Connect AUX IN 2 (Audio) on the Home Cinema to the Audio Out of the external analogue
component.
Be sure to match connector colours.
Press the button on the remote control to select input.
You can also use the button on the main unit.
The mode switches as follows :
DVD/CD DIGITAL AUX1 AUX2 USB OSD IPOD V/P IPOD TUNER.
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR
to this product.
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Connect the Digital Input (OPTICAL) on the Home Cinema to the Digital Output of the external digital
component.
Press the button on the remote control to select .
You can also use the button on the main unit.
The mode switches as follows :
DVD/CD DIGITAL AUX1 AUX2 USB OSD IPOD V/P IPOD TUNER.
~
~
M
`
~
Audio Cable (not supplied)
If the external analogue
component has only one Audio Out,
connect either left or right.
Optical Cable
(not supplied)
External Analogue Component
External Digital Component
To Next Page
Loading...
