●
• Turn off the power and hold the
(@) button on the
remote control for longer than 5 seconds. STAND BY RED
LED blinks on the display and all settings will return to the
default values.
• While “NO DISC” message appears on the display of main
unit, hold the main unit's (@) button for longer than 5
seconds. “INITIAL” appears on the display and all settings will
return to the default values.
• Press the POWER button.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM
antenna in an area with good reception.
To Next Page
Loading...
