Connections
CONNECTING THE FM ANTENNA
Connect the FM antenna supplied to the FM 751. Ω COAXIAL Jack.
Slowly move the antenna wire around until you find a location where reception is good, then 2.
fasten it to a wall or other rigid surface.
M
This unit does not receive AM broadcasts. `
Cooling Fan
The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit may rise •
and may damage it.
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a •
newspaper or cloth, heat may build up inside the unit and fire may result.)
To Next Page
Loading...
