DISC PLAYBACK
dB
Press the 1. OPEN/CLOSE ( ) button to open the disc tray.
Load a disc.2.
Place a disc gently into the tray with the disc’s label facing •
up.
Close the compartment by pressing the 3. OPEN/CLOSE ( )
button again.
Playback starts automatically.•
To stop playback, press the STOP (
) button during playback.
If pressed once, • PRESS PLAY is displayed and the stop position will be stored in memory.
If the PLAY (
) button or ENTER button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
If pressed twice, • STOP is displayed, and if the PLAY (
) button is pressed, playback starts from the
beginning.
To temporarily pause playback, press the PAUSE ( ) button during playback.
To resume playback, press the • PLAY ( ) button.
M
The initial screen may appear different,depending on the content of the disc. `
Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : `
a copy protection system) recommendations.
To Next Page
Loading...
