CONNECTING THE WIRELESS SUBWOOFER
The Subwoofer's linking ID is preset at the factory and the main unit and subwoofer should link (connect
wirelessly) automatically when the main unit is turned on. If the LINK indicator does not light when the main
unit and subwoofer are turned on, please set the ID by following the procedure below.
1. Plug the power cords of the main unit and subwoofer into an AC wall outlet.
2. Press the ID SET button on the back of the subwoofer with a small, pointed object for 5 seconds.
The STANDBY indicator isturned off and the LINK indicator (Blue LED)blinks quickly.
IDSET
3.
4.
5.
While the main unit is powered off (STANDBY mode),
press MUTE on the remote control for 5 seconds.
The ID SET message appears on the main unit's OLED display.
To Finalise the link, turn the main unit's power on while the
subwoofer's LINK LED blinks.
,, The main unit and the subwoefer are now linked (connected).
The LINK indicator (blue LED)on the subweofer is turned on.
,, You can enjoy better sound from the wireless subwoefer by selecting the sound effect. (See page 20)
,_ Before moving or installingthe product, be sure to turn off the power and disconnect the power
cord.
,_ If the main unit is powered off, the wireless subwoefer will be in the standby mode and the
STANDBY LED on the upper side will come on after the LINK indicator (Blue LED)blinks for 30
seconds.
,_ Ifyou use a device that uses the same frequency (2.4GHz) near the system, interference may
cause some sound interruption.
,_The transmission distance of the wireless signal between the main unit and sub is about 33 ft.,
but may vary depending on your operating environment. Ifa steel-concrete or metallic wall is
between the main unit and the wireless subwoefer, the system may not operate at all, because
the wireless signal cannot penetrate metal.
,_ If the main unit doesn't make a wireless connection, follow steps 1-5 above to retry the
connection between the main unitand wirelesssubwoofer.
The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away from
water and moisture.
For optimal listening performance, make sure that the area around the wireless subwoofer
location is clear of any obstructions.
11
To Next Page
Loading...
