oonnoot
ATTACHING THE TOROIDAL FERRITE CORE TO THE POWER CORD
OF THE SUBWOOFER
Attaching the Toroidalferrite core to the power cord of the subwoofer
helps prevent RFinterference from radio signals.
1. Pull the fixing tab of the Toroidalferrite core to open it.
2. Make two loops around the core with the power cable of the
subwoofer.
3. AttachtheToroidalferritecoreto the Subwooferpowercord as thefigure
showsand pressit untilitclicks.
LOOPING THE POWER CABLE AROUND THE TOROIDAL CORE
Lift up to release the lock and open the core,
Close the look,
Make two loops around the core with the power cable,
(Start winding 5-100m (12,75 - 25,5 in,)
away from the core),
12
To Next Page
Loading...
