Samsung HW-HM45C - Functions; Audio Input Modes

17
ENG
FUNCTIONS
FUNCTIONS
INPUT MODE
Press the ( ) button on the main unit’s top p anel or the ( SOURCE) button on the remote control to
select the mode you want.
Input mode Display
Optical Digital input
D.IN
AUX input
AUX
HDMI input
HDMI
BLUETOOTH mode
BT
TV SoundConnect
TV
USB mode
USB
●
Depending on its manufacturing
specifications, the (
) button may be
changed into the (
) button which
functionally works just the same.
The unit turns off automatically in the following
situations.
●
D.IN/HDMI/BT/TV/USB/ARC Mode
- If there is no audio signal for 25 minutes.
●
AUX Mode
- If the AUX cable is disconnected for
25 minutes.
- If there is no KEY input for 8 hours when the
AUX cable is connected.
- To turn the Auto Power Down function
ON or OFF, press and hold the
& button for
5 seconds. AUTO POWER DOWN ON / OFF
appears on the display.
ARC (HDMI OUT)
ARC (Audio Return Channel) transfers digital audio signal to the HDMI OUT (ARC) port.
HDMI Cable
1. Connect the TV supporting ARC to the Soundbar with an HDMI cable.
2. Turn on the TV, and turn on the Soundbar’s Anynet+.
3. Press the (
) button on the main unit’s top panel or the (SOURCE) button on the remote control to
select the D.IN mode.
●
Depending on its manufacturing specifications, the ( ) button may be changed into the ( )
button which functionally works just the same.
●
If the HDMI cable does not support ARC feature, ARC may not work properly.
●
To turn off the ARC function, turn Anynet+ off.
HW-HM45_HM45C_USA_ENG_141105.indd 17HW-HM45_HM45C_USA_ENG_141105.indd 17 2014-11-05  1:55:072014-11-05  1:55:07