15
ENG
FUNCTIONS
FUNCTIONS
INPUT MODE
Press each mode button on the remote control or the ( ) button on the main unit’s top panel to select the
mode you want.
Input mode Display
D.IN (Optical Digital in)
(White)
AUX input
(Red)
TV SoundConnect
(Green)
BLUETOOTH mode
(White)
USB mode (White)
●
Use the provided cable if a USB flash
memory device cannot be connected directly
to the unit.
The unit turns off automatically in the following situations:
●
D.IN/BT/TV/USB Mode
- If there is no audio signal for 25 minutes.
●
AUX Mode
- If the AUX cable is disconnected for 25 minutes.
- In Auto Power Down On mode, if there is no KEY
input for 8 hours when the AUX cable is
connected.
- To turn the Auto Power Down function ON or OFF,
press and hold the p button for 5 seconds.
Auto Power
Down
LED
ON
Green and Red
blink
OFF
Red and Red
blink
02839E-HW-J250-ZP-ENG-20150323.indd 15 2015/3/25 10:28:01
To Next Page
Loading...
