Samsung HW-J7511 - CONNECTIONS WITH TV USING OPTICAL (DIGITAL) CABLE

21
ENG
CONNECTIONS
CONNECTIONS WITH TV USING OPTICAL (DIGITAL) CABLE
5V 0.5A
SPK ADDWi-Fi SETUP
DC 24V
AUX IN
LAN HDMI IN OPTICAL IN
HDMI OUT
(TV-ARC)
OPTICAL IN
OPTICAL OUT
Optical Cable
(not supplied)
1. Connect OPTICAL IN (Audio) on the Soundbar to the OPTICAL OUT jack of the TV.
2. Press the (Source) button on the top panel of Soundbar or the SOURCE button on remote control to select
the D.IN mode.
+ Auto Power Link
If you have connected the main unit to a TV with a digital optical cable, set the Auto Power function ON to have
the Soundbar turn on automatically when you turn the TV on.
AUTO POWER LINK Display
ON
OFF - ANYNET+ / ON - POWER LINK
OFF
ON - ANYNET+ / OFF - POWER LINK
1. Connect the Soundbar and
a TV with an Optical cable. (not supplied)
2. Press the (Source) button on the main unit’s top panel or the SOURCE button on the remote control to
select the
D.IN mode.
3. Press the Anynet+ button on the remote control to toggle the Auto Power Link function on and off.
● Depending on the connected device, Auto Power Link may not function.
HW-J7500_J7501_XU_ENG_0811.indd 21HW-J7500_J7501_XU_ENG_0811.indd 21 2015-08-11  5:12:422015-08-11  5:12:42