14
Connecting to cabinets
Connect the S-Box (SNOW-AAE) and the cabinet to the installed cabinet for video signal transmission.
"
Connect the S-Box to the external device before connecting the S-Box to the cabinet.
"
Before connecting power to the cabinets, connect the I/G card to the cabinets first.
"
Connect only one type of LED pitch cabinets to a single S-Box. Normal picture quality may not be obtained if different types of cabinets are connected. Do NOT use different types of LED pitch
cabinets together.
e.g.) 4 x 4
S-Box
DATA (Forward)
ONE CONNECTONE CONNECT DATA
First I/G Card
First cabinet
Connection of horizontal cabinets
S-Box
4th, 8th, 12th
cabinet 5th, 9th, 13th cabinet
DATA DATA
Second I/G Card
DATA
ONE CONNECT
DATA (Reverse)
ONE CONNECT
Last cabinet
To Next Page
Loading...
