1-3
1. Precautions
1-4. Installation Precautions
For safety reasons, more than a people are required for carrying the product.
Keep the power cord away from any heat emitting devices, as a melted covering may cause re or electric shock.
Do not place the product in areas with poor ventilation such as a bookshelf or closet. The increased internal
temperature may cause re.
Bend the external antenna cable when connecting it to the product. This is a measure to protect it from being exposed
to moisture. Otherwise, it may cause a re or electric shock.
Make sure to turn the power off and unplug the power cord from the outlet before repositioning the product. Also check
the antenna cable or the external connectors if they are fully unplugged. Damage to the cord may cause re or electric
shock.
Keep the antenna far away from any high-voltage cables and install it rmly. Contact with the highvoltage cable or the
antenna falling over may cause re or electric shock.
When installing the product, leave enough space (0.1m) between the product and the wall for ventilation purposes.
A rise in temperature within the product may cause re.
1.
2.
3.
4.
5.
6.
7.
To Next Page
Loading...
Need help?
General