Getting started
10
2
After fully charging, disconnect the Bluetooth speaker from the charger.
•
To save energy, unplug the charger when not in use. The charger does not have a
power switch, so you must unplug the charger from the electric socket when not in
use to avoid wasting power. The charger should remain close to the electric socket
and be easily accessible while charging.
•
The socket-outlet shall be installed near the equipment and shall be easily
accessible.
Checking the remaining battery power
Press the Power button to check the remaining battery power.
Remaining battery power Indicator light status
70-100 % Four indicator lights on
40-70 % Three indicator lights on
20-40 % Two indicator lights on
10-20 % One indicator light on
0-10 % One indicator light blinking
To Next Page
Loading...
