Getting started
4
Maintaining water resistance
Your device supports water-resistance. Follow these tips carefully to maintain the water-
resistance of your device. Failure to do so may result in damage to your device.
•
Do not immerse the device in water deeper than 1 m or keep it submerged for more than
30 minutes.
•
Do not expose the device to water moving with force.
•
If the device is exposed to clean water, dry it thoroughly with a clean, soft cloth. If the
device is exposed to other liquids, such as salt water, ionised water, or alcoholic beverage,
rinse it with clean water and dry it thoroughly with a clean, soft cloth. If you do not follow
these instructions, the device’s performance and appearance may be affected.
•
If the device has been immersed in water or the microphone or speaker is wet,
sound may not be heard clearly during a call. Wipe the device with a dry cloth or dry it
thoroughly before using it.
•
Your device has been tested in a controlled environment and certified to be water-
resistant in specific situations (meets requirements of classification IPX7 as described
by the international standard IEC 60529-Degrees of Protection provided by Enclosures
[IP Code]; test conditions: 15-35 °C, 86-106 kPa, 1 metre, 30 minutes). Despite this
classification, it is still possible for your device to be damaged in certain situations.
To Next Page
Loading...
