Samsung LN-T2642H - PC Display Optimization

English - 44
1. Press the MENU button to display the menu.
  Pressthe▲or▼buttonstoselect"Setup",thenpresstheENTER button.
  Pressthe▲or▼buttonstoselect"PC",thenpresstheENTER button.
Change to the PC mode first.
2. Pressthe▲or▼buttonstoselect"AutoAdjustment",thenpresstheENTER button.
Press the EXIT button to exit.
How to Auto Adjust
Use the Auto Adjust function to have the TV set automatically adjust the video signals the monitor receives.
Thefunctionalsoautomaticallyne-tunesthesettingsandadjuststhefrequencyvaluesandpositions.
This function does not work in DVI-Digital mode.
Setting up the TV with your PC
1. Press the MENU button to display the menu.
  Pressthe▲or▼buttonstoselect"Setup",thenpresstheENTER button.
  Pressthe▲or▼buttonstoselect"PC",thenpresstheENTER button.
Change to the PC mode first.
2. Press the ENTER
button to select "Image Lock".
3. Pressthe▲or▼buttonstoselect"Coarse"or"Fine",thenpresstheENTER
button.
  Pressthe◄or►buttonstoadjustthescreenquality.
Vertical stripes may appear or the picture may be blurry.
Press the ENTER button.
Press the EXIT button to exit.
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning
alone, then
make the frequency adjustments to the utmost and fine tune again.(See page 43) After the noise has been reduced,
re-adjust the picture so that it is aligned on the center of the screen.
Setup
▲More
Blue Screen : Off
►
Melody : Midium
PC ►
Home Theater PC : Off ►
Energy Saving : Off
►
HDMl Black Level : Low
►
▼More
TV
Move Enter Return
PC
Image Lock ►
Position
►
Auto Adjustment
►
Image Reset ►
Resolution :1360X768 @60Hz
TV
Move Enter Return
PC
Image Lock ►
Position ►
Auto Adjustment ►
Image Reset
►
Resolution :1360X768 @60Hz
TV
Move Enter Return
Image Lock
Coarse 50
Fine 0
TV
Move Enter Return
Auto Adjustment in Progress.
Please Wait
50
▲
Coarse
▼
Move Adjust Return
BN68-01167A-Eng-00-0329.indd 44 2007-03-29 �� 7:53:23