English-13
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the button on the front of the panel.
Plug & Play Feature
When the TV is initially powered on, two basic customer settings proceed automatically and subsequently:
1. Press the POWER button on the remote control.
The message “Start Plug & Play” is displayed with “OK” selected.
2. Select the appropriate language by pressing the or buttons. Press the
ENTER button to confirm your choice.
3. The message “Check antenna input.” is displayed with “OK” selected. Press the
ENTER button.
4. Press the or buttons to select “Air”, “STD”, “HRC”, or “IRC”, then press
the ENTER button.
5. Press the ENTER button to select “Start”. The TV will begin memorizing
all of the available channels.
To stop the search before it has finished, press the ENTER button with “Stop”
selected.
6. Press the ENTER button. Press the or buttons to move to the
“Hour”, “Minute” or “am/pm”. Set the “Hour”, “Minute” or “am/pm” by pressing the
or buttons. Press the ENTER button.
(Refer to “Setting the Clock”on page 32.)
You can set the Hour and Minute directly by pressing the number buttons on the
remote control.
7. The message “Enjoy your watching.” is displayed.
When you have finished, press the ENTER button.
Operation
BN68-01001W-00Eng.qxd 7/24/06 8:04 PM Page 13
To Next Page
Loading...
