Automatic Volume Control
1. Press the MENU button to display the menu.
Press the or buttons to select “Sound”, then press the ENTER button.
2. Press the or buttons to select “Auto Volume”, then press the ENTER button.
3. Press the or buttons to set Auto Volume “On” or “Off” then press the
ENTER button.
Press the
EXIT button to exit.
Reduces the differences in volume level among broadcasters.
English-24
1. Press the MENU button to display the menu.
Press the or buttons to select “Sound”, then press the ENTER button.
2. Press the or buttons to select “MTS”, then press the ENTER button.
3. Press the or buttons to select a setting you want, then press the ENTER button.
Press the
EXIT button to exit.
Multi-Track Sound
• Choose Mono for channels that are broadcasting in mono, or if you are having difficulty
receiving a stereo signal.
• Choose
Stereo for channels that are broadcasting in stereo.
• Choose
SAP to listen to the Separate Audio Program, which is usually a foreign-language
translation.
Choosing a Multi-Channel Sound (MTS) track
Press the MTS buttons on the remote control repeatedly to select “Mono”, “Stereo”, or “SAP”.
Selecting the Internal Mute
1. Press the MENU button to display the menu.
Press the or buttons to select “Sound”, then press the ENTER button.
2. Press the or buttons to select “Internal Mute”, then press the ENTER button.
3. Press the or buttons to select “On” or “Off”, then press the ENTER button.
Press the
EXIT button to exit.
When “Internal Mute” is set to “On”, the Sound menus except for
“Sound Select” (in PIP mode) and MTS cannot be adjusted.
The VOL , VOL and MUTE buttons do not operate when the Internal Mute is set to On.
Sound output from the TV speakers is muted. This is useful when you want to listen to audio through your sound system instead of the TV.
BN68-01001W-00Eng.qxd 7/24/06 8:04 PM Page 24
To Next Page
Loading...
