English-25
Resetting the Sound Settings to the Factory Defaults
1. Press the MENU button to display the menu.
Press the or button to select “Sound”, then press the ENTER button.
2. Press the or button to select “Reset” then press the ENTER button.
3. Press the EXIT button to exit.
If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer
setting to the factory defaults.
You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room.
Connecting headphones
When you insert the head set jack into the corresponding port, you can operate only
“Internal Mute” and “Sound Select” (in PIP mode) in Sound menu.
Prolonged use of headphones at a high volume may damage your hearing.
You will not receive sound from the speakers when you connect headphones to the system.
You can select this option when “PIP” is set to “On”.
Main: Used to listen to the sound of the main picture.
Sub: Used to listen to the sound of the sub picture.
Listening to the Sound of the Sub (PIP) Picture
1. Press the MENU button to display the menu.
Press the or buttons to select “Sound”, then press the ENTER button.
2. Press the or buttons to select “Sound Select”, then press the ENTER button.
3. Press the or buttons to select “Main” or “Sub”, then press the ENTER button.
Press the
EXIT button to exit.
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
BN68-01001W-00Eng.qxd 7/24/06 8:04 PM Page 25
To Next Page
Loading...
