Viewing a photo
1, Press the W.LINK button on the remote control to display the "WISELINK"
menu.
2. Press the _ or !_ button to move to "Photo", then press the ENTER
button.
Photo files are displayed.
3. Press the 4 or !_ button to select the desired photo in the Photo list.
Then Press the Yellow button to select only one file.
4. Press the ENTER _ button over a photo icon.
The currently selected photo is displayed in full screen.
Using the option menu during a slide show (or Viewing a Photo)
1. During a slide show(or viewing a photo), Press the TOOLS button to set the option.
2. Press the A or • button to select the desired option. Then press the ENTER _ button.
Start Slide Show (or Stop Slide Show)
You can start or stop a Slide Show.
Press the A or _' button to select "Start Slide Show" (or "Stop Slide Show"),
then press the ENTER _ button.
Rotate
You can rotate images in full screen mode.
Press the A or T button to select "Rotate", then press the ENTER _ button.
Press the _ or !_ button repeatedly to rotate the photo by the desired amount.
> Whenever you press the ,_ button, it rotates by 270°, 180 °, 90 °, and 0 °.
> Whenever you press the _ button, it rotates by 90 °, 180 °, 270 °, and 0°.
> If you have select "Zoom", the "Rotate" deactivated.
> The rotated file is not saved.
> The Rotating function information icon is displayed at the top right of the
screen
This rotates a photo to its original
Rotating (0°) position
Rotating (180°) This rotates a photo by 180 degrees
Rotating (270°) This rotates a photo by 270 degrees
To Next Page
Loading...
