English - 17
Changing the Input Source
Source
Use to select TV or an external input source such
as a DVD player / Blu-ray player / cable box / STB
satellite receiver.
TC350 / TC550 / TC730
■ TV / PC / AV / Component / HDMI1/DVI /
HDMI2 / USB
1. Press the SOURCEE button on your remote.
2. Select a desired external input source.
✎
You can change the view mode among the All
and Connected by pressing l or r button.
✎
You can only choose external devices that are
connected to the TV. In Source, connected
inputs will be highlighted.
✎
In Source, PC always stays activated.
TC301
■ TV / AV / Component / HDMI1/DVI / USB
1. Press the SOURCEE button on your remote.
2. Select a desired external input source.
✎
You can change the view mode among the All
and Connected by pressing l or r button.
✎
You can only choose external devices that are
connected to the TV. In Source, connected
inputs will be highlighted.
Edit Name
Edit Name lets you associate a device name to an
input source. To access Edit Name, press the
TOOLST button on your remote when the Source
list is displayed. The following selections appear
under Edit Name:
■ VCR / DVD / Cable STB /
Satellite STB / PVR STB / AV
Receiver / Game / Camcorder
/ PC / DVI PC / DVI Devices
/ TV / IPTV / Blu-ray / HD
DVD / DMA: Name the device
connected to the input jacks to
make your input source selection
easier.
✎
If you connect a PC to the HDMI IN 1 (DVI)
port with an HDMI cable, assign PC to HDMI1/
DVI in Edit Name.
✎
If you connect a PC to the HDMI IN 1 (DVI)
port with an HDMI to DVI cable, assign DVI PC
to HDMI1/DVI in Edit Name.
✎
If you connect an AV device to the HDMI IN 1
(DVI) port with an HDMI to DVI cable, assign
DVI Devices to HDMI1/DVI in Edit Name.
Information
You can see detailed information about the selected
external device.
SOURCE
[TC350-SA]BN68-04796E-02L03.indb 17 2013-05-09 �� 2:41:35
To Next Page
Loading...
