43
Listening to Radio
You can listen to the chosen band (FM, MW, (LW),(SW1,2) broadcast stations)
by using either the automatic or manual tuning operation.
2
1
•
The selection toggles back
and forth between "FM
➝
MW
➝
(LW)
➝
(SW1,2)" each time
the TUNER(BAND) button is
pressed.
Tune in to the
desired station.
Press TUNER/
BAND button.
Manual Tuning
21
Select a broadcast
station.
Press the STOP ( ) button
to select PRESET and then
press button or turn Multi Jog
Knob to select the preset station.
Automatic Tuning 1
Press the Function
button to select the
desired band (FM,
MW,(LW),(SW1,2)).
Press the STOP
( )
button to
select "AUTO" and then press
button or turn Multi-Jog Knob to
automatically search the band.
Automatic Tuning 2
Press STOP
( )
to select
MANUAL and then briefly
press
or turn Multi Jog Knob
to tune in to a lower or higher frequency.
Manual Tuning
•
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
Press MONO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
Press button or
button to select the preset station.
Press and hold button
to automatically search the band.
Briefly press button to
Automatic Tuning 1
Remote Control Unit
Main Unit
Automatic Tuning 2
increase or decrease the frequency incrementally.