57
•
The loudspeakers are no longer used to output the sound.
•
Connect the Microphone.
•
Turn the MIC LEVEL knob to adjust the MIC volume.
•
Press the ECHO button to select ECHO1,ECHO2, and ECHO OFF.
•
During using the microphone ,you can press the REC/PAUSE button to record your favorite.
Connect the headphones to the PHONES jack on the front panel.
You can connect a set of headphones to your micro component system so that you
can listen to music or radio programmers without disturbing other people in the room.
The earphones must have a 3.5ø jack or an appropriate adaptor.
•
Prolonged use of headphones at a high volume may damage your hearing.
Note
Plug the microphone with a 6.3ø MIC jack into microphone terminal.
Connecting Headphones/Microphone(option)
To Next Page
Loading...
