Samsung MCM-A100 - View of the Function Controller

Function Controller Installation
The function controller is an additional controller which is used with the centralized controller.
Accessories
Function Controller Installation
E-4
Disassemble the function controller by using a groove
on its top.
1
Secure the rear cover of the function controller on the
wall with two screws.
2
Connect the C1 and C2 terminals in the function
controller to the same terminals in the centralized
controller.
3
Function
controller (1)
Cable-tie (2) Cable clamp
(6)
M4x16 tapped
screw (7)
Owner’s
instructions (1)
Installation
manual (1)