Need help?Do you have a question about the Samsung SPC-1010 and is the answer not in the manual?
General| Brand | Samsung |
|---|---|
| Model | SPC-1010 |
| Category | Controller |
| Language | English |
Introduces the SPC-1010 PTZ Controller and its primary function.
Lists key features such as camera control, protocols, and power support.
Illustrates the electrical connections for the PTZ controller and cameras.
Details the wiring steps for RS-485 communications between devices.
Details the function of key buttons like ESC/POWER, LOCK, SWING, GROUP, A/F, OSD, FOCUS, ZOOM.
Turns the PTZ controller on/off and shows initial system status.
Assigns a unique ID (1-255) to each connected camera.
Controls camera movement and zoom using the joystick.
Manages screen brightness, focus, and zoom via dedicated buttons.
Sets and moves the camera to predefined locations.
Automates camera movement between points, recalls presets, and uses auto-focus.
Manages camera OSD menu, secures the controller, and controls auxiliary output.
Configures camera-specific settings like address, protocol, and baud rate.
Configures general controller settings, firmware, and communication.
Manages firmware version, serial data, LCD backlight, sleep mode, buzzer, termination, and password.
Optimizes joystick calibration and resets controller to factory defaults.
Calibrates the joystick's movement for accurate Pan, Tilt, and Zoom control.
Details LCD display, speed control, and controller button functions.
Lists supported PTZ Dome cameras, receiver models, and control capacity.
Covers standards, transfer speed, voltage, temperature, humidity, dimensions, and weight.
To Next Page
