To Next PageTo Next Page
Need help?Do you have a question about the Samsung SCC-3100A and is the answer not in the manual?
General| Model | SCC-3100A |
|---|---|
| Manufacturer | Samsung |
| Power Supply | 12V DC |
| Operating Temperature | -10°C to +50°C |
| Operating Humidity | 20% to 80% |
General safety warnings regarding installation, handling, and usage of the appliance to prevent electric shock, fire, and injury.
Operational cautions regarding indoor use, dust, temperature, sunlight, and shock to protect the appliance.
Instructions for cleaning the controller body and advice on seeking qualified service personnel for maintenance.
FCC compliance information for Class A digital devices regarding radio frequency energy and potential interference.
Details the product's intended use with Speed Dome cameras, CCTV receivers, and Samsung DVRs, listing compatible models.
Highlights the controller's ability to manage multiple cameras, receivers, and DVRs, including multi-controller support and automatic operation.
Illustrates and labels the buttons on the SCC-3100A controller for easy identification and use.
Lists the essential components included with the SCC-3100A controller, such as the controller, junction box, cables, and power adapter.
Illustrates system connections, including connecting the controller to the junction box and external devices like DVRs and PTZ cameras.
Provides pin layout diagrams for RS-485/422 (D-SUB FEMALE) and RS-232C (D-SUB MALE) connections for proper wiring and interfacing.
Details the function of DIP switches on the junction box, specifically for RS-485 and RS-422 termination settings.
Illustrates general system connection methods and details connection procedures for SVR-1650/1640/950/440 models.
Explains controls in the Camera Setup Section and lists button compatibility across various camera manufacturers.
Details the functions of the number pad for data entry and the device selectors for choosing PTZ, MATRIX, DVR modes, and system setup.
Details the operation of the universal controller, including joystick functions for zoom and focus, and navigation buttons for menu control and playback.
Details the functions of DVR controller buttons such as QUICK SET, STATUS, SEARCH, REC, MENU, MULTI, AUTO, ALARM RESET, PIP, DVR FUNCTION, DIGITAL ZOOM, COPY, RELAY.
Provides a table showing button compatibility across various Samsung DVR models (SVR-1650, SVR-1640, SVR-950, SVR-1630, SVR-430, SVR-5416/5116, SVR-440).
Explains the camera controller's joystick for movement and zoom, and the ESC/ENTER buttons for OSD menu navigation.
Details the Junction Box layout and guides users through powering on the controller and external devices.
Explains the initial screen display and the process of setting a unique camera ID (1-255) for master/sub-controller operation.
Details how the joystick controls camera pan, tilt, and zoom movements, showing examples of wide and telephoto zoom.
Explains the use of ENTER and ESC buttons for navigating SPEED DOME OSD menus and adjusting camera movement speed.
Details the operation of the ZOOM W/T and FOCUS -/+ buttons for controlling camera zoom and manual focus adjustment.
Guides users on how to enter the PTZ Setup mode and navigate through different setup menus (PTZ SETUP 1, PTZ SETUP 2).
Explains how to set preset locations, configure Swing (alternating between two locations), and set up Group (sequential surveillance) functions.
Details setting up TOUR (sequences of Groups), configuring camera MODEL, and using TRACE for recording and replaying camera movements.
Details the procedure for setting up and operating the Swing function, which alternates camera movement between two assigned locations.
Explains the setup and operation of the Group function, allowing sequential surveillance of assigned locations with specified speeds and intervals.
Details how to set up and execute a Tour, which allows continuous operation of multiple pre-configured Groups for sequential surveillance.
Explains how to set the PTZ camera ID and type (model) using the controller, including how to change camera types.
Details the TRACE function for inputting and replaying camera movements using the joystick or control buttons, including memory limits and operation.
Explains the AF menu for manual or automatic focus adjustment after camera operation, recommending OSD menu setup for AF.
Details how to use the OSD button to display and control camera menus on the monitor, covering navigation and specific button functions.
Guides on setting the DVR ID and model for controller operation, including connection notes for various SVR models and sub-controller restrictions.
Explains how to navigate through the controller setup menus, including Controller ID, Serial Setup, Data Copy, Response, Password, Priority, and Default settings.
Details the process for setting the controller ID, emphasizing the master controller (ID 1) and the priority based on ID numbers for sub-controllers.
Explains how to configure serial port settings (RS-422/485) for connecting external devices, including baud rate, data bits, stop bits, and parity.
Details the Data Copy function for transferring master controller menu data to a sub-controller, including the process and success/failure messages.
Explains how to set the controller's RESPONSE function (ON/OFF) to match the camera's reception mode and configure the number of sub-controllers.
Provides DIP switch settings for SPD-3300/3000/2300, SPD-2500, SPD-2200, and SPD-1600 models related to response and communication.
Details how to set a 6-digit password for accessing controller setup values upon power-on or when entering setup modes.
Explains the password verification process and how to enter the password when required for appliance power-on or setup mode access.
Explains how to set priority restrictions for sub-controllers accessing PTZ cameras or DVRs, including ID limit setup.
Details how to reset changed controller setup values to their default values, including confirmation and controller restart.
Explains the manual function to display connected cameras on the MATRIX SYSTEM monitor by selecting monitor and camera numbers.
Details the use of the joystick for basic camera controls like PAN/TILT movement, ZOOM, and FOCUS adjustment in the MATRIX mode.
Details the AUTO SELECT function for displaying cameras in AUTO RUN, including setup, cancellation, deletion, and RUN/HOLD operations.
Explains how to set camera ID, toggle ID display ON/OFF, and position the ID display on the monitor within the MATRIX mode.
Details how to set the TIME and DATE for cameras in MATRIX mode, including saving the settings and adjusting the display position.
Explains how to set the TIME/DATE ON/OFF status and adjust the display position for the time and date on the MATRIX screen.
Provides a reference table for Swing and Group movement speeds, detailing setup values for horizontal (pan) and vertical (tilt) movements.
Provides basic troubleshooting steps for common issues like power not responding, system not operating, or joystick/keys not working.
Illustrates the physical dimensions of the SCC-3100A controller, showing width, height, and depth.
Summarizes the technical specifications of the SCC-3100A controller, including model, connectors, operation modes, communication settings, power, and physical characteristics.
