Samsung SCC-3100A - PTZ Camera Control Functions; Joystick Pan, Tilt, and Zoom; OSD Menu and Speed Adjustment; Camera Zoom and Focus Control

SYSTEM CONTROLLERSYSTEM CONTROLLER User’s ManualUser’s Manual
19
ENGLISH
18
4. Joystick/Camera Control Button
The joystick can be used to control the camera s left and right (pan) and up and down
(tilt) movements.
5. SPEED DOME OSD Menu Control
This is the ENTER/ESC button for SPEED DOME OSD
MENU
ESC : ESC button for PTZ CAMERA OSD menu.
ENTER : ENTER button for PTZ CAMERA OSD menu.
The joystick can be used to control camera zoom functions.
PTZ CONTROL PTZ CONTROL
[ Camera wide zoom ] [ Camera telephoto zoom ]
6. Camera Zoom Control
Press the ZOOM W/T button to control zoom wide
and zoom telephoto.
ZOOM W : Zoom Wide
ZOOM T : Zoom Telephoto
[ZOOM W/T button]
7. Camera Focus Control
Press the FOCUS -/+ button to control camera focus.
FOCUS - : Focus gets nearer.
FOCUS + : Focus gets further.
• The FOCUS -/+ button can be used as the ENTER/ESC
button for the SVR-1650/1640/950/1630 and SPD series.
[FOCUS -/+ button]
• Press the Esc (PTZ)/Enter (PTZ) button for 2 sec. or longer, then let go to adjust
the movement speed of the camera manually.
• The Esc button must be pressed again after setting the movement speed.
Remarks