Need help?Do you have a question about the Samsung SSC-1000 and is the answer not in the manual?
General| Brand | Samsung |
|---|---|
| Model | SSC-1000 |
| Category | Controller |
| Language | English |
All safety and operating instructions should be read before operation.
Safety and operating instructions should be retained for future reference.
All warnings on the appliance and in operating instructions should be adhered to.
All operating and use instructions should be followed.
Unplug before cleaning; use a damp cloth, not liquid cleaners.
Use only manufacturer-recommended attachments to avoid hazards.
Do not use near water to prevent fire or shock.
Place product on stable cart/surface; avoid unstable ones.
Do not block openings for proper ventilation and to prevent overheating.
Remote control up to 1.2km via RS-485 communication.
Controls Samsung Dome Camera, Receiver Units, and Matrix Switchers.
Connect up to 128 Dome Cameras, 128 Multiplex, or 32 receiver units.
Up to 8 units can be connected simultaneously; risk of malfunction exists.
Features LCD for status and Joy Stick for convenient manipulation.
Indicates the action state of the System Controller.
Used for designating monitor/preset/pattern numbers and menu navigation.
Selects Samsung Dome Camera/receiver unit address or input channel.
Selects the output channel of the Matrix Switcher.
Controls Pan/Tilt movement of Samsung Dome Camera or Receiver Unit.
Controls IRIS, FOCUS, and ZOOM of the camera lens.
Enters or exits the set-up mode; LED indicates status.
Searches for preset positions; LED indicates selection mode.
Executes PATTERN mode set up in the Samsung Dome Camera.
Consecutively scans preset positions in the Samsung Dome Camera.
Repeatedly moves Pan/Tilt spots; LED indicates mode status.
Cancels ALARM Mode; equivalent to "RESET/ERASE" button.
Controls AUX output of the Receiver Unit.
Executes Sequence switching in Matrix Switcher; SALVO mode becomes SALVO Switching.
Executes TOUR Program set up in the Matrix Switcher.
Executes SALVO Program set up in the Matrix Switcher.
Used for the Multiplex control mode.
Stops Switching mode of SEQUENCE, TOUR, SALVO.
Proceeds visuals one step at a time in Switching HOLD Mode.
Returns visuals one step at a time in Switching HOLD Mode.
Decides selected item or set-up value.
DC9V power input terminal.
RS-485 communication connection for cameras, multiplexers, controllers.
Connected to the RS-485 terminal of the Matrix Switcher.
Connect cameras, multiplexers, or receiver units to the output terminal.
Connect the DC 9V power supply to the unit.
Enter set-up mode via MENU button, input password if required.
Set or disable password using 4-digit input.
Select desired baud rate from options like 38400, 19200, 9600.
Select protocol from a list of manufacturers like SAMSUNG, PELCO-D.
Set controller address number; '0' for single unit use.
Configure camera settings like monitor, camera menu, preset, data backup.
Configure matrix switcher settings, including monitor and camera inputs.
Set up preset positions for receiver units or cameras, including pan/tilt/lens.
Initialize the camera connected to the controller.
Download the set-up data of the camera.
Upload the set-up data downloaded to the camera.
Check communication settings and firmware version of SSC-1000.
Control the multiplex functions.
Move camera between two preset points; LED flashes during action.
Scan multiple preset positions sequentially; LED flashes during action.
Watch camera moves set up in pattern mode; LED indicates action.
Select and watch preset positions; LED indicates action.
Select and watch preset positions for the receiver unit.
Control the auxiliary power (AUX1-AUX4) of the receiver unit.
Display camera visuals on desired monitor by selecting monitor and camera.
Automatically convert cameras for each monitor in sequence.
Show camera visuals for monitor groups in Salvo program simultaneously.
Control monitor output by selecting multiplex address.
Control spot output by selecting multiplex address.
Exit the multiplex control mode.
To Next Page
