177
System
9
9 System
9.15 DivX® Video On Demand
MENU [] System DivX® Video On Demand ENTER
[ ]
Shows the registration code authorized for the product. If you connect to the DivX web site and register
using that code, you can download the VOD registration file.
For more information about DivX® VOD, visit “http://vod.divx.com”.
The Anynet+ device does not
play.
z You cannot use the play function when Plug & Play (initial setup)
is in progress.
The connected device is not
displayed.
z Check whether or not the device supports Anynet+ functions.
z Check whether or not the HDMI cable is properly connected.
z Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+
setup menu.
z Search Anynet+ devices again.
z Anynet+ requires an HDMI connection. Make sure the device is
connected to your product with an HDMI cable.
z Some HDMI cables may not support Anynet+ functions.
z If the connection is terminated because there has been a power
failure or the HDMI cable has been disconnected, please repeat
the device scan.
Problem Possible Solution
m
To Next Page
Loading...
