Disassembly and Reassembly
Samsung Electronics4-12
No Parts Procedure Remark
2
Blower
&
Motor
3) If the Cabinet-Top Motor is assembled on
the side of the set, the procedure of
disassembling the Filter is just as the
above.
1) After disassembling 13 indicating screws,
detach Ass’y Cabinet-Top Motor.
(Use +Screw Driver.)
2) After disassembling 3 indicating screws,
detach Ass’y Case Blower Upper.
(Use +Screw Driver.)
_
Press the pothook of the Case Blower
and detach Ass’y Case Blower Upper.
To Next Page
Loading...
