C.8
PRINTING FROM DOS APPLICATIONS
Selecting Print Settings
• Toner Density determines the toner density of page. The
default value is Medium.
• Paper Type provides the printer with information about the
type of paper to be used for a print job. For the best result, set
this to the paper type you loaded in the paper tray of the
printer. When using the plain paper, set this to Printer default.
• Image Quality improves the print quality of your text and
image and make the characters and images appear smoother. It
is preset to Text Enhancement at the factory.
• Time out determines the amount of time (in seconds) the
printer will wait before printing the last page of a print job that
does not end with a command to print the page or a formfeed
character. You can set from 0 to 300 seconds.
JOB
To Next Page
Loading...
