Samsung ML-1451N - Page 192

F.3
P
RINTER OPTIONS
6 Hold the PS SIMM so that the notch
and the connection point are aligned
with the slot as shown, and insert the
SIMM all the way into the lower slot
labeled FLASH-ROM MODULE at a 45
degrees angle.
FLASH-ROM MODULE
DRAM MODULE
Memory and PostScript SIMMs
1
2
1
2
4 Hold the memory SIMM so that the
notch and the connection point
are aligned with the slot as shown, and
insert the SIMM all the way into the
upper slot labeled DRAM MODULE at
a 45 degrees angle.
FLASH-ROM MODULE
DRAM MODULE
5 Rotate it up until it snaps into place.
FLASH-ROM MODULE
DRAM MODULE
1
2
1
2
FLASH-ROM MODULE
DRAM MODULE
7 Rotate it up until it snaps into place.