2.23
S
ETTING UP YOUR PRINTER
Installing USB Driver
2
When the opening screen appears, select the appropriate
language.
2. Install USB driver
1
Place the CD-ROM in the CD-ROM drive. Installation will
start automatically.
If the CD-ROM drive does not automatically run:
Select Run from the Start menu, and type
x:\cdsetup.exe in the Open box (where x is the drive
letter for the CD-ROM drive), then click OK.
Note: If the New Hardware
Found box appears during the
installation procedure, click
the x in the upper right
corner of the box, or click
Cancel.
To Next Page
Loading...
