5.3
P
RINTING TASKS
Printing a Document
Make sure the Paper Source is set to Tray1. If you use
paper in the Multi-Purpose Tray or optional Tray2, select the
corresponding paper source.
Manual Feed source is used when printing to special
media. You have to feed one sheet at a time into the printer.
See page 4.10.
If the paper source is set to Auto Select, the printer
automatically selects the print media according to the
following order: Multi-Purpose Tray, Tray1, Tray2 (option).
Make sure the Paper Type is set to Use Printer Default.
If you load a different type of print media, select the
corresponding paper type. For further information on print
media, refer to chapter 4 ‘Print Media’.
Also, select the paper size you have loaded in your printer.
The Paper Orientation option allows you to select the
direction in which information is printed on a page. Portrait
prints across the width of the page, letter style. Landscape
prints across the length of the page, spreadsheet style.
You can also see the printable area.
Landscape
Portrait
To Next Page
Loading...
