1
Toner Level You can view the level of toner remaining in
each toner cartridge. The machine and the
number of toner cartridge(s) shown in the above
window may differ depending on the machine in
use. Some machines do not have this feature.
2
Buy Now You can order replacement toner cartridge(s)
from online.
3
User’s Guide You can view the online User’s Guide.
This button opens the Troubleshooting
Guide when an error occurs. You can
directly open the troubleshooting section
in the user’s guide.
4
Printer Setting You can configure various machine settings in
the Printer Settings Utility window. Some
machines do not have this feature.
Changing Smart Panel ‘s settings
Right-click on the Smart Panel icon and select Configure Smart Panel.
Select the settings you want from the Configure Smart Panel window.
Using the Unified Linux Driver Configurator
The Unified Driver Configurator is a tool primarily intended for configuring
machine devices. You need to install Unified Linux Driver to use Unified
Driver Configurator. (See "Installing the Unified Linux Driver" on page 22.)
After the driver is installed
on your Linux system, the Unified Driver
Configurator icon will automatically be created on your desktop.
Opening the Unified Driver Configurator
1. Double-click the Unified Driver Configurator on the desktop.
You can also click the Start
up Menu icon and select Samsung Unified
Driver > Unified Driver Configurator.
2. Click each bu
tton on the left to switch to the corresponding configuration
window.
1 Printers
Configuration
2 Ports
Configuration
To use the on screen help, click Help.
3. After
changing the configurations, click Exit to close the Unified Driver
Configurator.
Printers configuration
Printers configuration has the two tabs: Printers and Classes.
Printers tab
View the current system’s printer configuration by clicking on the
machine icon button on the left side of the Unified Driver Configurator
window.
1
Switches to Printers configuration.
2
Shows all of the installed machine.
3
Shows the status, model name and URI of your machine.
The printer control buttons are, as follows:
• Refre
sh: Renews the available machines list.
• Add Pr
inter: Allows you to add a new machines.
To Next Page
Loading...
