P
ROGRAMME
I
NSTALLING
P
RINTER
O
PTIONS
F.11
F
4
Align the printer with the support unit and lower it into
place on the tabs.
5
Plug the cable into the connector on the back of the printer.
6
Load paper in the Tray2. For information about loading
paper in the tray, see page 2.6.
7
Reconnect the power cord and cables and then turn the
printer on.
NOTE:
When you print a document, configure the printer driver
from your application. To access the printer driver, see page 5.2.
CAUTIONS:
Do not remove Tray 1 from the printer while you are
printing using the optional Tray 2. If you do this, a paper jam may
occur. Use the optional Tray 2 with Tray 1.
To Next Page
Loading...
