U
SING
P
RINT
M
ATERIALS
4.19
4
Printing on Transparencies
1
Open the Multi-Purpose Tray and the rear output tray.
2
Load transparencies with the print side up, and the top
with the adhesive strip entering the printer first.
Adjust the guide to fit the width of the transparencies.
Guidelines
• Only use transparencies recommended for use in laser
printers.
• Ensure that transparencies are not wrinkled, curled, or have
any torn edges.
• Hold the transparencies by the edges and avoid touching the
print side. Oils deposited on the transparency can cause print
quality problems.
• Be careful not to scratch or leave fingerprints on the print
side.
To Next Page
Loading...
