Samsung ML-2550 - Printing to the Rear Output Tray (Face Up)

U SING P RINT M ATERIALS
4.6
Printing to the Rear Output Tray (Face up)
The printer always prints to the rear output tray if it is open.
Paper comes out of the printer face-up, with the last page on
top.
Printing from the Multi-Purpose Tray to the rear output tray
provides the straight paper path. Opening the rear output tray
might improve output quality with the following:
• over 100 sheets of paper continuously
• envelopes
• labels
• small custom-size paper
• postcards
• paper lighter than 60 g/m
2
(16 lb) or heavier than 105 g/m
2
(28 lb)
• transparencies: some special transparencies may have
stacking problem by curl. In that case, please use the top
output tray (face down).
To open the rear output tray:
1 Open the rear door by pulling it down. The cover functions
as the output tray.
CAUTION: The fusing area at the rear portion of the inside of
your printer is hot when powered. Be careful not to be burned
when accessing this area.