U
SING
P
RINT
M
ATERIALS
4.22
2
When you print, configure the paper source, type and size
properly in the software application. For details, see
page 5.7.
For details about setting on the control panel, see page 3.5.
Printing on Card Stock or
Custom-sized Materials
Postcards, 3.5 by 5.83 in. (index) cards and other custom-sized
materials can be printed with your printer. The minimum size is
76 by 127 mm (3 by 5 in.) and the maximum size is 216 by
356 mm (8.5 by 14 in.).
Guidelines
• Always insert the short-edge into the Multi-Purpose Tray first.
If you want to print in landscape mode, make this selection
through your software. Inserting paper long-edge first may
cause a paper jam.
• Do not load more than 10 cards into the Multi-Purpose Tray at
a time.
• Do not print on media smaller than 76 mm (3 in.) wide or
127 mm(5 in.) long.
• Set margins at least 6.4 mm (0.25 in.) away from the edges
of the material in the software application
To Next Page
Loading...
