Samsung ML-2571N - Page 68

Disassembly and Reassembly
Samsung Electronics
Service Manual
5-5
5. To remove the Top Cover, first remove the 4
screws securing the Side Cover(L,R) and unlatch
the hooks, as shown below. Then remove the Top
Cover from the Side Cover(L,R).
6. Remove the 2 screws from the separated Top
Cover as shown below, and then separate the LED
Lens from the On-Line Key.
Top Cover
Side
Cover, L
Side Cover, R
Main Cover
LED Lens
On-Line Key
5.2.5 Cap-SMPS
1. Before Disassembling
- Separate the Front Cover (Refer to 5.2.1)
- Separate the SMPS Cover (Refer to 5.2.3)
- Separate the Main Cover (Refer to 5.2.4)
2. Remove the 1 screw and release the Harness from
the Cap-SMPS and remove it, as shown below.
Harness
Cap-SMPS