Media and tray
31
2. Menu overview and basic setup
c Select MP Tray in paper source, then press OK.
d Start printing in application.
4
Printing on special media
The table below shows the special media usable in each tray.
The media types are shown in the Printing Preferences. Select the
proper media type to get the highest printing quality.
• When using special media, we recommend you feed one
sheet at a time (see "Print media specifications" on page
65).
• Printing the special media (Face up)
If special media are printed out with curl, wrinkles, crease,
or black bold lines, open the rear cover and pull down the
pressure lever as shown below and try printing again.
Keep the rear cover opened during printing.
To see for paper weights for each sheet, refer to "Print media
specifications" on page 65.
Types Tray 1
Manual feeder/
Multi-purpose tray
Plain
To Next Page
Loading...
Need help?
General