Media and tray
31
2. Learning the basic usage
• Flatten any curl on postcards, envelopes, and labels before
loading them into the multi-purpose tray.
• When printing on special media, you must follow the
loading guidelines (see "Printing on special media" on
page 32).
• When papers overlap when printing using the multi-
purpose tray, open tray 1 and remove the overlapping
papers then try printing again.
• When paper does not feed well while printing, push the
paper in manually until it starts feeding automatically.
1
Open the multi-purpose tray and unfold the multi-purpose
tray extension, as shown.
2
Adjust the multi-purpose tray paper width guides to the width
of the paper.
3
Flex or fan the edge of the paper stack to separate the pages
before loading paper.
To Next Page
Loading...
