Media and tray
32
2. Learning the basic usage
4
Load the paper. Squeeze the multi-purpose tray paper width
guides and adjust them to the width of the paper.
5
Set the paper type and size from the control panel (see
"Setting the paper size and type" on page 38).
The settings set from the machine’s driver override the
settings on the control panel.
a To print from an application, open an application and start
the print menu.
b Open Printing Preferences (see "Opening printing
preferences" on page 41).
c Press the Paper tab in Printing Preferences and select an
appropriate paper type.
For example, if you want to use a label, set the paper type
to Label.
d Select MP Tray in paper source, then press OK.
e Start printing in application.
4
Printing on special media
The table below shows the special media usable in each tray.
The media types are shown in the Printing Preferences. Select the
proper media type to get the highest printing quality.
To Next Page
Loading...
