Connect the microphone to the microphone jack.
Insert the tape for recording in the deck.
Press REC/Pause button.
Recording starts.
Input the voice through the microphone.
GB
You can connect a set of headphones to your micro component
system so that you can listen to music or radio programmers
without disturbing other people in the room.
The earphones must have a 3.5
ø
jack or an appropriate adapter.
Connect the headphones to the Phones jack on the front panel.
Result
: The loudspeakers are no longer used to output the sound.
Prolonged use of headphones at a high volume may damage
your hearing.
While listening to a compact disc or a cassette, you can
set the system to switch off automatically
Example: You wish to go to sleep to music.
Press Sleep on the remote control.
Result: The following indications are displayed:
Press Sleep one or more times to indicate how long the
system should continue playing before it switches off:
At any time, you can:
Check the remaining time by pressing Sleep
Change the remaining time by repeating Steps 1 and 2
To cancel SLEEP function, press Sleep one or more times until
OFF is display.
Setting the System to Switch off
Automatically
Connecting Headphones
1
2
3
90 MIN
90 MIN 60 MIN 45 MIN
OFF 15 MIN 30 MIN
Microphone (not supplied) Function
The microphone enables the user to mix in his or her vocals
to sing-along with the music.
Preparation
Plug the microphone with a 3.5mm mic jack into microphone terminal.
Recording with the Microphone
To Next Page
Loading...
