03 Functions
To Delete a File
You can delete a file from your USB device.
1.
Select a file you want to delete.
2.
Press the DELETE button on the remote
control. "DEL N" is displayed.
3.
Press the DELETE button on the remote
control or press the
1
,
2
until "DEL Y"
is displayed.
4.
When “DEL Y” is displayed, press the
¬
button. “DELETE END” appears and the
deletion is completed.
| NOTE |
✎
The NTFS file system are not supported.
To safely remove a USB device
1.
Press the
5
button twice while the USB is
playing or press the
5
button once when
play has stopped.
2.
When the REMOVE message appears on
the display, remove the USB device.
Read Before Connecting USB Storage
Devices
•
Some USB devices may not work properly with this
product. The maximum current supported by the
USB port for an external device is 500 mA (at 5V
DC).
•
This product only supports external HDD`s that are
formatted in the FAT 16,FAT 32 file system.
•
USB 2.0 HDDs should be connected to a separate
power source. Otherwise, the USB 2.0 HDDs will
not work.
•
If multiple USB external storage devices are
connected together, only the files in the first HDD
will be played.
•
If a usb external device that has multi
partition,only the first partition which support file
system is recognized.
•
Files with DRM are not supported. Digital Right
Management (DRM) restricts unauthorized access
to a DRM file so that the file is protected from
piracy.
•
Even if a file has an .mp3 extension, the file cannot
be played if it is formatted in MPEG layer 1 or 2.
•
Do not use an unrecognized USB hub.
•
Only the first 15 characters of an audio file name
are shown on the product's display.
•
Only removable HDDs with less than 160GB are
supported. Depending on the device, a 160GB or
more removable HDD may not be supported.
•
It can take several minutes for the product to
recognize the files on some USB devices.
•
Some USB devices (USB HDDs, in particular) may
pause when moving from track to track.
•
With USB storage devices supporting USB VER1.1
only, the product may access files slowly or may
not recognize the file properties.
•
The maximum electrical current provided by each
USB port to connected USB devices is 0.5A (based
on DC 5V).
•
If there is no USB connection or the STOP mode
lasts for more than 25 minutes, the product will
automatically turn off.
•
Some USB devices, digital cameras, USB card
readers, iPods, iPhones, and Smart Phones may not
be supported.
•
A maximum of 999 files can be played per USB
device.
Searching for a Track Quickly
You can select a track directly without the
1
,
2
button.
CDDA/MP3-CD/USB
1.
Press the
SEARCH
button.
After pressing the
SEARCH
button, press
the
,
or
.
button on the remote control
or turn the
VOLUME/JOG
control on the
product to the left or right to select a
desired track.
•
You can move to the selected track
directly.
2.
When the search is complete, the track
will automatically start playing.
<Search Display>
0 12 0 25
Total track
Indicator
Selected Track
Indicator
15 English
02793F-MX-JS5000-ZA-ENG-20150224.indd 15 2016/2/3 15:32:49
To Next Page
Loading...
