Samsung MX-ST4CB - 02 Product Overview; Top Panel of the Sound Tower

ENG - 2
02 PRODUCT OVERVIEW
Top Panel of the Sound Tower
BASS
󱂛
󱂖
󱂙
󱂗
󱂘
󱂚
󱂕󱂔
󱂓
󱂓
Remote
Sensor
When operating the Sound Tower system, please aim the front of the remote control at
the remote sensor.
󱂔
LED Indicator
Displays operating messages or current source of the Sound Tower system.
The information sources represented by each LED are as follows:
(BT) (USB) (AUX1) (AUX2) (Power/Battery)
󱂕
Power Turns the Sound Tower on and off.
󱂖
Light
Press the (Light) button to turn the Lighting Mode on.
󱂗
Source
Press to select a source connected to the Sound Tower.
Press and hold the (Source) button for more than 5 seconds to enter the
“SEARCHING TV” mode.
󱂘
Play/Pause
• Play/Pause
Press the button to pause a music le temporarily.
When you press the button again, the music le plays.
• Demo play
Press and hold the button for more than 5 seconds to start the Demo play while
the system is turned on. 5 LEDS ashing simultaneously and it plays demo music for
90seconds.
– Please be careful as it may play louder than the set volume.
󱂙
Volume down Press the (Volume down) button to lower the volume.
󱂚
Volume up
Press the (Volume up) button to raise the volume.
󱂛
BASS Press the BASS button to use the powerful bass sound.