23
NOTE: The firmware update is not mandatory for those who encounter no
problem with installing and using their Samsung SSD product. Therefore,
it is up to the user whether or not to execute the firmware update.
System Requirements
The Samsung Firmware Utility is a DOS-based application.
Be sure to check if the following requirements are satisfied before
installing and using this product.
Hardware Requirements
- Samsung SSD 470 Series (MZ-5PA064, MZ-5PA128, MZ-5PA256
Models) or Samsung SSD 830 Series (all models)
- USB Flash Disk (Minimum 10 MB capacity; for those using the DOS-
based utility only)
Software Requirements
- The Samsung SSD Magician software must be installed on your
computer
- The latest firmware data file is required
Acrobat Reader 8.0 or above
To Next Page
Loading...
