20
Preparations
1
1 Preparations
Confirm a menu selection.
Pressing the [ ] button when the OSD menu is not displayed will
change the input source (Client/Analog). If you power on the product or
change the input source by pressing the [ ] button, a message that
shows the changed input source will appear at the top left corner of the
screen.
Analog mode: Automatically adjust the screen settings.
Client mode: Disconnect from the server.
Power on or off the product.
Go to SETUP&RESET Power Key and select Power Off or
Screen Off. (Refer to "7.5 Power Key" for details on
Power Key).
To turn the product on or off when Power Off is selected, press
the power button.
The default setting is Power Off.
OSD Guide
When a control button on the product is pressed, the OSD guide will be
displayed before the onscreen menu opens. (The guide shows the
function of the button pressed.)
To access the onscreen menu when the guide is displayed, press the
corresponding button again.
The OSD guide may vary depending on the function or product model.
Refer to the actual product.
Icons Description
To Next Page
Loading...
