What to do if my Samsung NC241 Monitor displays 'Check Signal Cable'?
If your Samsung Monitor displays the message "Check Signal Cable", ensure that the cable is properly connected to the product. Refer to section "3.2 Connecting and Using a PC" for detailed instructions.
How to fix a Samsung Monitor when the power LED is off and the screen won't switch on?
If the power LED is off and the screen won't switch on for your Samsung Monitor, verify that the power cable is connected properly.
What to do if the message "Check Signal Cable" appears on my Samsung NC241?
If you see the message "Check Signal Cable" on your Samsung Monitor, ensure the cable is properly connected to the product and that the device connected to the monitor is powered on.
General| Panel Type | TN |
|---|---|
| Response Time | 5 ms |
| Brightness | 250 cd/m² |
| Aspect Ratio | 16:9 |
| Screen Size | 24 inches |
| Resolution | 1920 x 1080 |
| Contrast Ratio | 1000:1 |
| Connectivity | DVI |
| Viewing Angle | 170° / 160° |
| Color Support | 16.7 million colors |
| Input Ports | DVI |
Manual copyright and restrictions on reproduction.
Explains symbols and icons used throughout the manual.
Instructions for safely cleaning the monitor screen and exterior.
Ensures adequate space around the product for ventilation.
General warnings about product safety and potential hazards.
Safety guidelines related to electrical connections and usage.
Guidance on maintaining proper posture while using the monitor.
Verifying all included items against the product list.
Identifies and describes the physical components and buttons of the monitor.
Details the ports and their functions on the back of the monitor.
Step-by-step guide to attaching the monitor stand.
Guide for mounting the monitor using a wall-mount kit or desktop stand.
Instructions for securing the monitor with an anti-theft lock.
Explains the PC over IP technology and its benefits.
Steps to connect and use the PCoIP feature.
How to establish network and connect USB peripherals.
Connecting microphones, headphones, speakers, and secondary monitors.
Detailed steps for connecting the monitor to a host PC using a LAN cable.
Overview of the OSD interface for PCoIP.
Explains various configuration tabs like Network, IPv6, and Session.
Settings for IP address, subnet mask, gateway, and DNS.
How to configure device connections and automatic peer discovery.
Settings for display topology, touch screen, and audio devices.
Update password, configure Wake On LAN, and Wake On USB.
Instructions for updating the Teradici firmware.
How to adjust the monitor's brightness and contrast levels.
How to adjust sharpness and configure SAMSUNG MAGIC Color modes.
Adjusts color temperature and mid-range brightness (grey scale).
Moves the screen horizontally/vertically and adjusts OSD menu position.
Resets product settings to factory defaults.
Sets menu language and OSD display timeout.
Configures power button functions and menu window transparency.
Pre-checks and product testing before contacting customer service.
Solutions for screen, sound, and source device problems.
Answers common questions about settings like frequency and resolution.
Details on panel size, dimensions, connectors, and operating conditions.
Explains power-saving features and consumption levels.
Lists supported resolutions and frequencies for optimal picture quality.
Lists worldwide contact numbers for Samsung customer support.
Details service costs, customer fault, and environmentally safe disposal.
Defines key terms like OSD, Coarse, Gamma, and Scanning Rate.
To Next Page