67
Using "PCoIP"
2
2 Using "PCoIP"
2.4.12 Firmwre Update
Using the Firmwre Update page, change the Teradici Firmware.
Configuring the settings
1 Set the product and PC IP addresses to enable the product to connect to the PC over a network.
2 Enter the IP address set for the product in the URL address field on the PC to access the product
administrative web page.
3 Log in (Log In) and select Upload Firmware. The Firmware Upload
page appears.
(See the image below.)
4 Select a Firmware to replace the logo and press Upload.
5 Once upload is complete, the Reset button appears. Click the Reset button to reboot the client.
Go to Options Information, and view the Firmware Version information.
To Next Page
Loading...
