Samsung NX10 - Setting the Image Quality of the Picture; Setting the Quality of Movie

51
Setting the image quality of the
picture
The picture taken is saved either in JPEG or in RAW
format.
The compression ratio is reduced as the image quality
gets better. It is necessary to increase the file size to have
a better quality picture.
1
In Shooting mode, press [MENU].
2
Select Shooting 1 (
1
) → Quality → an
option.
Super Fine
Set to super fine qua ity
Fine
Set to fine quality
Normal
Set to normal quality
A
RAW
Save in the RAW file format
A
S.Fine+RAW
Save super-fine image and RAW file at the same
time
RA
E
Fine+RAW
Save fine image and RAW file at the same time
A
MA
Normal+RAW
Save normal image and RAW file at the same time
Setting the quality of movie
The recorded movies are saved as normal or high
quality.
1
In Shooting mode, press [MENU].
2
Select Shooting1 (
1
) → Quality → an
option.
Normal
Set normal quality
HQ
Set high quality
• The RAW file format images are saved without loss of
data, and the photo size is set to 14M(4592 x 3056)
only. Although the settings such as white balance,
contrast, saturation and sharpness are not reflected
on the image, they are saved as information. If you
want to save the RAW data into the image files
such as JPEG or TIFF format, the provided software
(SAMSUNG RAW Converter) should be used. RAW
files have the extension of “SRW.” (For example:
“SAM_9999.SRW”)
Setting the resolution and quality
The function can be set directly by pressing [Fn] in the shooting mode.