104
Wireless network > Connecting to a WLAN and configuring network settings
Network connection tips
•
You must insert a memory card to use the Wi-Fi features.
•
The quality of the network connection will be determined by the AP.
•
The further the distance between your camera and the AP, the longer
it will take to connect to the network.
•
If a nearby device is using the same radio frequency signal as your
camera, it may interrupt your connection.
•
If your AP name is not in English, the camera may not be able to
locate the device or the name may appear incorrectly.
•
For network settings or a password, contact your network
administrator or network service provider.
•
If a WLAN requires authentication from the service provider, you may
not be able to connect to it. To connect the WLAN, contact your
network service provider.
•
Depending on the encryption type, the number of digits in the
password may differ.
•
A WLAN connection may not be possible in all surroundings.
•
The camera may display a WLAN enabled printer on the AP List.
You cannot connect to the network via a printer.
•
You cannot connect your camera to a network and a TV
simultaneously. Also, you cannot view photos or videos on a TV while
connected to a network.
•
Connecting to a network may incur additional charges. Costs will vary
based on the conditions of your contract.
•
If you cannot connect to a WLAN, try another AP from the available AP
list.
•
You can also connect to free WLANs in some foreign countries.
•
A login page may appear when you select free WLANs provided
by some network service providers. Enter your ID and password to
connect to the WLAN. For information about registering or the service,
contact the network service providers.
•
Be cautious when you enter personal information for an AP connection.
Do not enter any payment or credit card information on your camera.
The manufacturer is not liable for any problem caused by entering such
information.
•
Available network connections may differ by country.
•
The WLAN feature of your camera must comply with radio transmission
laws in your region. To ensure compliance, use the WLAN feature only
in the country where you purchased the camera.
•
The process for adjusting network settings may differ, depending on
network conditions.
•
Do not access a network that you are not authorized to use.
•
Before you connect to a network, ensure your battery is fully charged.
•
When a DHCP server is not available you must make an autoip.txt file
and copy it to the inserted memory card to connect to the network
using Auto IP.
To Next Page
Loading...
Need help?
General
